• Screenprinting: As with most performance fabrics, care must be taken when putting the shirts through the dryer. If possible, a low temperature cure ink should be used and the dryer temperature should be kept around 320 degrees or less (the lower the better). This may require a slower belt speed to allow for ink curing.
• Dye migration: Because the black stripes are sublimated onto the fabric, a white flash base layer has been suggested to provide a “seal” to prevent dye migration.
• Embroidery: There shouldn’t be any issues here.
• Vinyl transfers: transfer films designed to block dye migration are available through most major brand suppliers. Dye Sublimation transfers: Not recommended.